panduit

Lọc theo thông số

Overall Length: 102 mm Material: Nylon 6.6 Color: Yellow

Sort by

Compare

View as

Compare

0₫ - 0₫

0₫

0₫ - 0₫

0₫

Solar label, 2.0" H x 4.0" W (50.8mm x 101.6mm), warning header, 'Inverter output connection do not relocate this overcurrent device' (legend), polyester adhesive, orange header and black/white, 50 labels/roll,1 roll/package.

_THÔNG SỐ KỸ THUẬT:

0₫ - 0₫

0₫

0₫ - 0₫

0₫

Compare

0₫ - 0₫

0₫

0₫ - 0₫

0₫

Solar label, 2.0" H x 4.0" W (50.8mm x 101.6mm), warning header, 'Turn off photovoltaic ac disconnect prior to working inside panel' (legend), polyester adhesive, orange header and black/white, 50 labels/roll,1 roll/package.

_THÔNG SỐ KỸ THUẬT:

0₫ - 0₫

0₫

0₫ - 0₫

0₫

Compare

0₫ - 0₫

0₫

0₫ - 0₫

0₫

Solar label, 4.0" H x 4.0" W (101.6mm x 101.6mm), warning header, 'Electrical shock hazard do not touch terminals terminals on both the line and load sides may be energized in the open position…' (legend), polyester adhesive, orange header and black/white

_THÔNG SỐ KỸ THUẬT:

0₫ - 0₫

0₫

0₫ - 0₫

0₫

Compare

0₫ - 0₫

0₫

0₫ - 0₫

0₫

Stainless steel hardware for use in mounting lugs for grounding plates and universal beam grounding clamps, includes: two hex head bolts 1/2-13 thread 1" long, two split lock washers for 1/2" diameter bolt, and two SAE flat washers for 1/2" diameter bolt.

_THÔNG SỐ KỸ THUẬT:

0₫ - 0₫

0₫

0₫ - 0₫

0₫

Compare

16.910₫ - 16.910₫

16.910₫

16.910₫ - 16.910₫

16.910₫

Stainless Steel Metal Edge Clip for Solar Applications. Can be installed on a Panel thickness ranging from 0.051" to 0.098" and can accommodate 1 or 2 wires with a diameter range of 0.161" to 0.240". Use when cable orientation is Parallel to the Outer edg

Wire Routing Management Protection / Cable Conduit Supports / Cable Conduit Clamps Clips: Panduit MEC100-PV-CMÔ TẢ SẢN PHẨM Stainless Steel Metal E...

View full details

16.910₫ - 16.910₫

16.910₫

16.910₫ - 16.910₫

16.910₫

Compare

17.440₫ - 17.440₫

17.440₫

17.440₫ - 17.440₫

17.440₫

Stainless Steel Metal Edge Clip for Solar Applications. Can be installed on a Panel thickness ranging from 0.051" to 0.098" and can accommodate 1 or 2 wires with a diameter range of 0.161" to 0.240". Use when cable orientation is Perpendicular to the Oute

Wire Routing Management Protection / Cable Conduit Supports / Cable Conduit Clamps Clips: Panduit MEC100-90-PV-CMÔ TẢ SẢN PHẨM Stainless Steel Meta...

View full details

17.440₫ - 17.440₫

17.440₫

17.440₫ - 17.440₫

17.440₫

Compare

16.450₫ - 16.450₫

16.450₫

16.450₫ - 16.450₫

16.450₫

Stainless Steel Metal Edge Clip for Solar Applications. Can be installed on a Panel thickness ranging from 0.051" to 0.098" and can accommodate 1 or 2 wires with a diameter range of 0.200" to 0.300". Use when cable orientation is Parallel to the Outer edg

Wire Routing Management Protection / Cable Conduit Supports / Cable Conduit Clamps Clips: Panduit MEC100-2PV-CMÔ TẢ SẢN PHẨM Stainless Steel Metal ...

View full details

16.450₫ - 16.450₫

16.450₫

16.450₫ - 16.450₫

16.450₫

Compare

17.440₫ - 17.440₫

17.440₫

17.440₫ - 17.440₫

17.440₫

Stainless Steel Metal Edge Clip for Solar Applications. Can be installed on a Panel thickness ranging from 0.051" to 0.098" and can accommodate 1 or 2 wires with a diameter range of 0.200" to 0.300". Use when cable orientation is Perpendicular to the Oute

Wire Routing Management Protection / Cable Conduit Supports / Cable Conduit Clamps Clips: Panduit MEC100-90-2PV-CMÔ TẢ SẢN PHẨM Stainless Steel Met...

View full details

17.440₫ - 17.440₫

17.440₫

17.440₫ - 17.440₫

17.440₫

Compare

0₫ - 0₫

0₫

0₫ - 0₫

0₫

Stainless steel mounting hardware for busbar; two 1/4-20 hex bolts, two 1/4-20 hex nuts, four 1/4 flat washers and two 1/4 Belleville compression washers. Mounting hardware for rack or cabinet; two #10-32 thread-forming screws and two M5 thread-forming sc

Grounding Bonding / Grounding Esd Hardware Accessories / Mounting Hardware Kits: Panduit HDW1/4-A-KTMÔ TẢ SẢN PHẨM Stainless steel mounting hardwar...

View full details

0₫ - 0₫

0₫

0₫ - 0₫

0₫

Compare

0₫ - 0₫

0₫

0₫ - 0₫

0₫

Stainless steel mounting hardware for busbar; two 1/4-20 hex bolts, two 1/4-20 hex nuts, four 1/4 flat washers and two 1/4 Belleville compression washers. Mounting hardware for rack or cabinet; two #12-24 thread-forming screws and two M6 thread-forming sc

Grounding Bonding / Grounding Esd Hardware Accessories / Mounting Hardware Kits: Panduit HDW1/4-KTMÔ TẢ SẢN PHẨM Stainless steel mounting hardware ...

View full details

0₫ - 0₫

0₫

0₫ - 0₫

0₫

Compare

0₫ - 0₫

0₫

0₫ - 0₫

0₫

Stainless steel mounting hardware for busbar; two 3/8-16 hex bolts, two 3/8-16 hex nuts, four 3/8 flat washers and two 3/8 Belleville compression washers. Mounting hardware for rack or cabinet; two #10-32 thread-forming screws and two M5 thread-forming sc

_THÔNG SỐ KỸ THUẬT:

0₫ - 0₫

0₫

0₫ - 0₫

0₫

Compare

0₫ - 0₫

0₫

0₫ - 0₫

0₫

Stainless steel mounting hardware for busbar; two 3/8-16 hex bolts, two 3/8-16 hex nuts, four 3/8 flat washers and two 3/8 Belleville compression washers. Mounting hardware for rack or cabinet; two #12-24 thread-forming screws and two M6 thread-forming sc

Grounding Bonding / Grounding Esd Hardware Accessories / Mounting Hardware Kits: Panduit HDW3/8-KTMÔ TẢ SẢN PHẨM Stainless steel mounting hardware ...

View full details

0₫ - 0₫

0₫

0₫ - 0₫

0₫

Compare

0₫ - 0₫

0₫

0₫ - 0₫

0₫

Ten grounding strips; 73.40" (1.9m) length; .67" (17mm) width; .03" (.76mm) thickness; provided with .16 oz. (5cc) of antioxidant, ten grounding stickers, 30 cage nut bonding studs, 80 #12-24 bonding nuts and 30 strip clips.

_THÔNG SỐ KỸ THUẬT:

0₫ - 0₫

0₫

0₫ - 0₫

0₫

Compare

46.581.380₫ - 46.581.380₫

46.581.380₫

46.581.380₫ - 46.581.380₫

46.581.380₫

Ten grounding strips; 83.90" (2.1m) length; .67" (17mm) width; .03" (.76mm) thickness; provided with .16 oz. (5cc) of antioxidant, ten grounding stickers, 30 cage nut bonding studs, 80 #12-24 bonding nuts and 30 strip clips.

_THÔNG SỐ KỸ THUẬT:

46.581.380₫ - 46.581.380₫

46.581.380₫

46.581.380₫ - 46.581.380₫

46.581.380₫

Compare

0₫ - 0₫

0₫

0₫ - 0₫

0₫

Ten grounding strips; 89.15" (2.3m) length; .67" (17mm) width; .03" (.76mm) thickness; provided with .16 oz. (5cc) of antioxidant, ten grounding stickers, 30 cage nut bonding studs, 80 #12-24 bonding nuts and 30 strip clips.

_THÔNG SỐ KỸ THUẬT:

0₫ - 0₫

0₫

0₫ - 0₫

0₫

Compare

0₫ - 0₫

0₫

0₫ - 0₫

0₫

Ten grounding strips; 90.90" (2.3m) length; .67" (17mm) width; .03" (.76mm) thickness; provided with .16 oz. (5cc) of antioxidant, ten grounding stickers, 30 cage nut bonding studs, 80 #12-24 bonding nuts and 30 strip clips.

_THÔNG SỐ KỸ THUẬT:

0₫ - 0₫

0₫

0₫ - 0₫

0₫

Compare

2.924.600₫ - 2.924.600₫

2.924.600₫

2.924.600₫ - 2.924.600₫

2.924.600₫

The 100–24-H America for Panduit's PanTher LS8E and LS8EQ Hand-Held Thermal Transfer Printers is part of the complete line of identification solutions from Panduit. It is available individually or as part of the printer kit. [LS8E-ACS]; PAN125

Signs Labels Identification / Labels Markers Printers / Label Printers Accessories: Panduit LS8E-ACSMÔ TẢ SẢN PHẨM The 100–24-H America for Panduit...

View full details

2.924.600₫ - 2.924.600₫

2.924.600₫

2.924.600₫ - 2.924.600₫

2.924.600₫

Compare

3.070.580₫ - 3.070.580₫

3.070.580₫

3.070.580₫ - 3.070.580₫

3.070.580₫

The 100–24-Her LS8E and LS8EQ Hand-Held Thermal Transfer Printers is part of the complete line of identification solutions from Panduit. It is available individually or as part of the printer kit. [LS8E-ACE]; PAN124

Signs Labels Identification / Labels Markers Printers / Label Printers Accessories: Panduit LS8E-ACEMÔ TẢ SẢN PHẨM The 100–24-Her LS8E and LS8EQ Ha...

View full details

3.070.580₫ - 3.070.580₫

3.070.580₫

3.070.580₫ - 3.070.580₫

3.070.580₫

Compare

18.380₫ - 18.380₫

18.380₫

18.380₫ - 18.380₫

18.380₫

The 2-way adhesive backed cable tie mount in white is mounted with rubber adhesive tape. It is 1.1" long x 1.1" wide (27.9 x 27.9 mm) and made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is used with mini

Wire Routing Management Protection / Cable Wire Ties Mounts Straps / Cable Tie Mounts: Panduit ABMS-A-CMÔ TẢ SẢN PHẨM Panduit’s ABMS-A-C 2-way rubb...

View full details

18.380₫ - 18.380₫

18.380₫

18.380₫ - 18.380₫

18.380₫

Compare

13.180₫ - 13.180₫

13.180₫

13.180₫ - 13.180₫

13.180₫

The 2-way adhesive backed cable tie mount in white is mounted with rubber adhesive tape. It is 1.1" long x 1.1" wide (27.9 x 27.9 mm) and made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is used with mini

Wire Routing Management Protection / Cable Wire Ties Mounts Straps / Cable Tie Mounts: Panduit ABMS-A-DMÔ TẢ SẢN PHẨM Panduit’s ABMS-A-D 2-way rubb...

View full details

13.180₫ - 13.180₫

13.180₫

13.180₫ - 13.180₫

13.180₫

Compare

18.930₫ - 18.930₫

18.930₫

18.930₫ - 18.930₫

18.930₫

The 4-way adhesive backed cable tie mount in black is applied with rubber adhesive tape. It is 1" long x 1" wide (25.4 x 25.4 mm) and made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is used with miniatur

Wire Routing Management Protection / Cable Wire Ties Mounts Straps / Cable Tie Mounts: Panduit ABM100-A-D20MÔ TẢ SẢN PHẨM Panduit’s ABM100-A-D20 4-...

View full details

18.930₫ - 18.930₫

18.930₫

18.930₫ - 18.930₫

18.930₫

Compare

0₫ - 0₫

0₫

0₫ - 0₫

0₫

The 4-way adhesive backed cable tie mount in black is applied with rubber adhesive tape. It is 1" long x 1" wide (25.4 x 25.4 mm) and made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is used with miniatur

_THÔNG SỐ KỸ THUẬT:

0₫ - 0₫

0₫

0₫ - 0₫

0₫

Compare

9.250₫ - 9.250₫

9.250₫

9.250₫ - 9.250₫

9.250₫

The 4-way adhesive backed cable tie mount in black is mounted with acrylic adhesive tape. It is 0.50" long x 0.50" wide (12.7 x 12.7 mm) and made of weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness.

Wire Routing Management Protection / Cable Wire Ties Mounts Straps / Cable Tie Mounts: Panduit ABM1M-AT-M0MÔ TẢ SẢN PHẨM Panduit’s ABM1M-AT-M0 4-wa...

View full details

9.250₫ - 9.250₫

9.250₫

9.250₫ - 9.250₫

9.250₫

Compare

12.590₫ - 12.590₫

12.590₫

12.590₫ - 12.590₫

12.590₫

The 4-way adhesive backed cable tie mount in black is mounted with acrylic adhesive tape. It is 0.75" long x 0.75" wide (19.1 x 19.1 mm) and made of weather-resistant ABS plastic. It is used with miniature and intermediate cable ties. It is designed for

Wire Routing Management Protection / Cable Wire Ties Mounts Straps / Cable Tie Mounts: Panduit ABMM-AT-D0MÔ TẢ SẢN PHẨM Panduit’s ABMM-AT-D0 4-way ...

View full details

12.590₫ - 12.590₫

12.590₫

12.590₫ - 12.590₫

12.590₫

panduit

Filters

Lọc theo thông số

Solar label, 2.0" H x 4.0" W (50.8mm x 101.6mm), warning header, 'Inverter output connection do not relocate this overcurrent device' (legend), polyester adhesive, orange header and black/white, 50 labels/roll,1 roll/package.

Solar label, 2.0" H x 4.0" W (50.8mm x 101.6mm), warning header, 'Turn off photovoltaic ac disconnect prior to working inside panel' (legend), polyester adhesive, orange header and black/white, 50 labels/roll,1 roll/package.

Solar label, 4.0" H x 4.0" W (101.6mm x 101.6mm), warning header, 'Electrical shock hazard do not touch terminals terminals on both the line and load sides may be energized in the open position…' (legend), polyester adhesive, orange header and black/white

Stainless steel hardware for use in mounting lugs for grounding plates and universal beam grounding clamps, includes: two hex head bolts 1/2-13 thread 1" long, two split lock washers for 1/2" diameter bolt, and two SAE flat washers for 1/2" diameter bolt.

Stainless Steel Metal Edge Clip for Solar Applications. Can be installed on a Panel thickness ranging from 0.051" to 0.098" and can accommodate 1 or 2 wires with a diameter range of 0.161" to 0.240". Use when cable orientation is Parallel to the Outer edg

Stainless Steel Metal Edge Clip for Solar Applications. Can be installed on a Panel thickness ranging from 0.051" to 0.098" and can accommodate 1 or 2 wires with a diameter range of 0.161" to 0.240". Use when cable orientation is Perpendicular to the Oute

Stainless Steel Metal Edge Clip for Solar Applications. Can be installed on a Panel thickness ranging from 0.051" to 0.098" and can accommodate 1 or 2 wires with a diameter range of 0.200" to 0.300". Use when cable orientation is Parallel to the Outer edg

Stainless Steel Metal Edge Clip for Solar Applications. Can be installed on a Panel thickness ranging from 0.051" to 0.098" and can accommodate 1 or 2 wires with a diameter range of 0.200" to 0.300". Use when cable orientation is Perpendicular to the Oute

Stainless steel mounting hardware for busbar; two 1/4-20 hex bolts, two 1/4-20 hex nuts, four 1/4 flat washers and two 1/4 Belleville compression washers. Mounting hardware for rack or cabinet; two #10-32 thread-forming screws and two M5 thread-forming sc

Stainless steel mounting hardware for busbar; two 1/4-20 hex bolts, two 1/4-20 hex nuts, four 1/4 flat washers and two 1/4 Belleville compression washers. Mounting hardware for rack or cabinet; two #12-24 thread-forming screws and two M6 thread-forming sc

Stainless steel mounting hardware for busbar; two 3/8-16 hex bolts, two 3/8-16 hex nuts, four 3/8 flat washers and two 3/8 Belleville compression washers. Mounting hardware for rack or cabinet; two #10-32 thread-forming screws and two M5 thread-forming sc

Stainless steel mounting hardware for busbar; two 3/8-16 hex bolts, two 3/8-16 hex nuts, four 3/8 flat washers and two 3/8 Belleville compression washers. Mounting hardware for rack or cabinet; two #12-24 thread-forming screws and two M6 thread-forming sc

Ten grounding strips; 73.40" (1.9m) length; .67" (17mm) width; .03" (.76mm) thickness; provided with .16 oz. (5cc) of antioxidant, ten grounding stickers, 30 cage nut bonding studs, 80 #12-24 bonding nuts and 30 strip clips.

Ten grounding strips; 83.90" (2.1m) length; .67" (17mm) width; .03" (.76mm) thickness; provided with .16 oz. (5cc) of antioxidant, ten grounding stickers, 30 cage nut bonding studs, 80 #12-24 bonding nuts and 30 strip clips.

Ten grounding strips; 89.15" (2.3m) length; .67" (17mm) width; .03" (.76mm) thickness; provided with .16 oz. (5cc) of antioxidant, ten grounding stickers, 30 cage nut bonding studs, 80 #12-24 bonding nuts and 30 strip clips.

Ten grounding strips; 90.90" (2.3m) length; .67" (17mm) width; .03" (.76mm) thickness; provided with .16 oz. (5cc) of antioxidant, ten grounding stickers, 30 cage nut bonding studs, 80 #12-24 bonding nuts and 30 strip clips.

The 100–24-H America for Panduit's PanTher LS8E and LS8EQ Hand-Held Thermal Transfer Printers is part of the complete line of identification solutions from Panduit. It is available individually or as part of the printer kit. [LS8E-ACS]; PAN125

The 100–24-Her LS8E and LS8EQ Hand-Held Thermal Transfer Printers is part of the complete line of identification solutions from Panduit. It is available individually or as part of the printer kit. [LS8E-ACE]; PAN124

The 2-way adhesive backed cable tie mount in white is mounted with rubber adhesive tape. It is 1.1" long x 1.1" wide (27.9 x 27.9 mm) and made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is used with mini

The 2-way adhesive backed cable tie mount in white is mounted with rubber adhesive tape. It is 1.1" long x 1.1" wide (27.9 x 27.9 mm) and made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is used with mini

The 4-way adhesive backed cable tie mount in black is applied with rubber adhesive tape. It is 1" long x 1" wide (25.4 x 25.4 mm) and made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is used with miniatur

The 4-way adhesive backed cable tie mount in black is applied with rubber adhesive tape. It is 1" long x 1" wide (25.4 x 25.4 mm) and made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is used with miniatur

The 4-way adhesive backed cable tie mount in black is mounted with acrylic adhesive tape. It is 0.50" long x 0.50" wide (12.7 x 12.7 mm) and made of weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness.

The 4-way adhesive backed cable tie mount in black is mounted with acrylic adhesive tape. It is 0.75" long x 0.75" wide (19.1 x 19.1 mm) and made of weather-resistant ABS plastic. It is used with miniature and intermediate cable ties. It is designed for

Added to your cart:

Compare products