BULGIN Fuse holder; 5x20mm; 250V; on panel; black; UL94V-0; -20÷85°C [FX0463]

Bulgin Captive Carrier Fuseholders Bulgin captive carrier fuseholders are designed to give the degree of protection demanded in today's sophisticated electronic equipment. These fuseholders carry world-wide safety approvals from UL, VDE, CSA and IMQ and are manufactured from high grade flame retardant nylon and polyester materials. Bulgin captive carrier fuseholders are designed for 5x20mm fuses and feature protection against shock to category PC3, whilst the captive carrier design allows for even more flexibility and ease of use. Screwdriver release screw cap Captive carrier guards against lost fuse-holder caps Nylon cap and glass filled nylon nut Panel cut out: 12.8Ø, 11.94A/F PC3 protection Polyester body Approvals UL, VDE, CSA, IMQ Panel Mounting CATEGORIES OF PROTECTION AGAINST ELECTRIC SHOCK,PC1: No integral protection against electric shock. If required, designers must provide additional protection against electric shock on equipment.,PC2: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 standard test finger, when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.,PC3: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 1mm diameter rigid test wire when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.