DOWMOLYKOTE 3452MOLYKOTE 3452
Mỡ silicone flo chịu hoá chất MOLYKOTE® 3452 Chemical Resistant Valve Grease là loại mỡ silicone flo màu trắng, cấp NLGI 2–3, dùng cho van nút, phớt, gioăng và một số ổ trục tiếp xúc với hoá chất ăn mòn, nhiên liệu, dầu, dung môi, nhiệt độ cao hoặc chân không cao. Công thức làm đặc bằng PTFE kết hợp dải nhiệt làm việc ước tính từ -31°C đến 232°C với dữ liệu đã được ghi nhận về tải trọng, mất mỡ khi rửa bằng nước, tách dầu, bay hơi và phơi nhiễm hoá chất. Mỡ silicone flo Dầu gốc silicone flo Chất làm đặc PTFE NLGI 2–3 -31°C đến 232°C Mỡ màu trắng Sử dụng cho van, phớt và ổ trục MOLYKOTE® 3452 được cung cấp dưới dạng mỡ van silicone flo màu trắng, dùng để bôi trơn và làm kín trong các ứng dụng chịu hoá chất. Tính chất ở trạng thái cung cấp Công nghệ bôi trơn Silicone flo / PTFE Dầu silicone flo làm đặc bằng polyme flo hoá; trang sản phẩm hiện tại xác định PTFE là chất làm đặc và chất bôi trơn rắn. Độ đặc NLGI 2–3 Độ xuyên sau 60 lần là 263 theo ASTM D217. Độ nhớt dầu gốc 9.930 cSt ở 40°C Giá trị từ trang sản phẩm của nhà cung cấp cho dầu gốc silicone flo; không dùng giá trị này để đánh giá khả năng bơm của mỡ thành phẩm. Ngoại quan Mỡ màu trắng Bảng dữ liệu an toàn (SDS) hiện hành tại Mỹ mô tả thêm là trắng mờ.
Chemical-resistant fluorosilicone grease MOLYKOTE® 3452 Chemical Resistant Valve Grease A white, NLGI 2–3 fluorosilicone grease for plug valves, seals, packings, and selected bearings exposed to aggressive chemicals, fuels, oils, solvents, high temperatures, or high vacuum. The PTFE-thickened formulation combines an estimated -31°C to 232°C service range with documented load, water-washout, bleed, evaporation, and chemical-exposure data. Fluorosilicone base oil PTFE thickener NLGI 2–3 -31°C to 232°C White grease Valve, seal, and bearing use MOLYKOTE® 3452 is supplied as a white fluorosilicone valve grease for chemical-resistant lubrication and sealing applications. As supplied As-supplied grease properties Lubricant technology Fluorosilicone / PTFE Fluorosilicone oil thickened with fluorinated polymer; the current product page identifies PTFE as the thickener and solid lubricant. Consistency NLGI 2–3 Worked penetration is 263 after 60 strokes by ASTM D217. Base-oil viscosity 9,930 cSt at 40°C Current supplier product-page value for the fluorosilicone base oil; do not treat this as finished-grease pumpability. Appearance White grease The current U.S. SDS further describes the appearance as white translucent.

















![MOLYKOTE 3452 [MOLYKOTE 3452]](https://image.chanhvinh.com/anh/dow/m/dow-molykote-3452-1.webp)