LOCTITEFP4470/30D0ECCOBOND FP4470 – 30cc Syringe - 468135
Sản phẩm này so với các loại thuộc họ FP gần giống thì như thế nào? FP 4470 dùng cùng hệ đóng rắn với 4450, nhưng hệ nhựa epoxy/anhydride hơi khác so với FP 4450(HF). Tg thấp hơn, và 4470 có hàm lượng chất độn cao hơn vài phần trăm nên CTE thấp hơn (19 so với 17 ppm). FP 4470 cũng có kích thước hạt chất độn nhỏ hơn (<50 um) so với FP 4450, và độ bám dính cao hơn FP 4450(HF). Chúng tôi có thông tin nội bộ cho thấy các loại chất lỏng bán dẫn cũ này đạt UL94HB ở độ dày 1/8 inch, nhưng không có dữ liệu thử nghiệm hay thẻ vàng (yellow card) và chúng tôi cũng không có kế hoạch thử nghiệm. Đây chỉ là thông tin tham khảo, hy vọng hữu ích. Dưới đây là một số giá trị thử nghiệm cũ để tham khảo, không phải thông số kỹ thuật được đảm bảo. Phân tích nhiệt Đường cong DSC. Nhiệt độ khởi đầu (on-set) của FP4470 khoảng 140 °C, tính theo giao điểm của 2 đường màu đỏ. Vị trí các đường đỏ mang tính chủ quan, nên các người và phần mềm khác nhau có thể cho kết quả hơi khác nhau từ cùng một đường cong. Tuy vậy, đây vẫn là phương pháp "tiêu chuẩn" được chấp nhận rộng rãi để tính nhiệt độ khởi đầu. Điều đáng chú ý hơn là nhiệt độ khởi đầu tính được luôn cao hơn điểm BẮT ĐẦU ĐÓNG RẮN (START of CURE), là thời điểm vật liệu bắt đầu tỏa nhiệt và đường nền lệch lên khỏi đường thẳng.
How does this product fare compared to the rest of the close FP family? FP 4470 uses the same hardener system as 4450, but the epoxy/anhydride resin system is slightly more different compared to FP 4450(HF). Tg is lower and 4470 has few % higher filler loading for lower CTE (19 vs 17ppm). FP 4470 also has smaller filler particle size (<50um) vs FP 4450 and higher adhesion vs FP 4450(HF). We have internal information showing that these legacy semiconductor liquids pass UL94HB at 1/8” thickness but do not have the test data or yellow card nor are we going to test for it. This is anecdotal but, hopefully, helpful. The following are some older tested values for your assistance and information but, by no means, guaranteed specifications. Thermal Analysis Data DSC Curve The on-set temperature of FP4470 is around 140 Celsius as calculated by the X-section of the 2 red lines. You can imagine that the positioning of the red lines is a bit “subjective”, so different people & different software can get slightly different results from the same curve. Nevertheless, this is widely accepted as the “standard” method of calculating the on-set temperature. A more interesting point is that the calculated on-set is always higher than the START of CURE. This is where the material starts to exotherm, and the baseline deviates upwards from a straight line.

















![LOCTITE ECCOBOND FP4470 – 30cc Syringe - 468135 [FP4470/30D0]](https://image.chanhvinh.com/anh/loctite/m/loctite-fp4470-30d0-1.webp)