DOWSIL 340 SILICONE HEAT SINK GREASE
Hợp chất tản nhiệt DOWSIL™ 340 Heat Sink Compound DOWSIL™ 340 Heat Sink Compound là hợp chất tản nhiệt gốc silicone một thành phần, màu trắng, không đóng rắn và không chảy, được thiết kế để kết nối nhiệt giữa linh kiện điện tử và cụm PCB với tản nhiệt, khung máy và các phụ kiện làm mát khác. Sản phẩm lấp đầy các khe hở không khí cực nhỏ giữa các bề mặt tiếp xúc để giảm trở kháng tiếp xúc và cải thiện việc truyền nhiệt ra khỏi linh kiện phát nhiệt. Công thức không đóng rắn giúp cụm tản nhiệt có thể tháo lắp, bảo trì và làm lại. Dạng kem không chảy giúp giữ hợp chất ở đúng vị trí sau khi bôi. Độ dẫn nhiệt 0,67 W/m·K hỗ trợ truyền nhiệt từ linh kiện đến phụ kiện làm mát. Công thức ít rỉ dầu giúp duy trì tiếp xúc nhiệt theo thời gian. Phù hợp để châm keo bằng tay hoặc tự động. Tóm tắt quy trình sử dụng Mỡ tản nhiệt dùng ngay Số thành phần: một thành phần. Kiểu đóng rắn: không đóng rắn; không cần lò hay sấy sau khi bôi. Độ nhớt: 542.000 cP / 542 Pa·s (điển hình). Nhiệt trở: 0,16 °C·cm²/W ở 40 psi (điển hình). Hạn sử dụng: 60 tháng ở 38°C khi bảo quản đúng khuyến cáo. Vì sao nên dùng hợp chất tản nhiệt Cải thiện truyền nhiệt trên các bề mặt không hoàn hảo Ngay cả các bề mặt kim loại trông phẳng vẫn có đỉnh, đáy và túi khí cực nhỏ. Không khí dẫn nhiệt kém, nên tiếp xúc trực tiếp kim loại với kim loại có thể gây nhiệt trở không cần thiết. DOWSIL™ 340 Heat Sink Compound lấp đầy các khe hở vi mô này để tạo đường dẫn nhiệt liên tục hơn giữa nguồn nhiệt và tản nhiệt.
Heat sink compound DOWSIL™ 340 Heat Sink Compound DOWSIL™ 340 Heat Sink Compound is a one-part, white, non-curing and non-flowing silicone thermal compound designed for thermal coupling of electronic devices and PCB assemblies to heat sinks, chassis, and other cooling hardware. It fills microscopic air gaps between mating surfaces to reduce interface resistance and improve heat transfer away from heat-generating components. Non-curing formulation supports reworkable and serviceable heat sink assemblies. Non-flowing paste helps keep the compound in place after application. 0.67 W/m·K thermal conductivity supports heat transfer from components to cooling hardware. Low bleed formulation helps maintain thermal contact over time. Suitable for manual or automated dispensing. Processing summary Ready-to-use thermal grease Number of parts: one-part material. Cure type: non-curing; no oven or post-cure required. Viscosity: 542,000 cP / 542 Pa·s typical. Thermal resistance: 0.16 °C·cm²/W at 40 psi typical. Shelf life: 60 months at 38°C when stored as recommended. Why use a heat sink compound Improve heat transfer across imperfect surfaces Even flat-looking metal surfaces contain microscopic peaks, valleys, and air pockets. Air is a poor thermal conductor, so direct metal-to-metal contact can create unnecessary thermal resistance. DOWSIL™ 340 Heat Sink Compound fills these microscopic gaps to create a more continuous thermal path between the heat source and heat sink.

















![DOWSIL 340 SILICONE HEAT SINK GREASE [340]](https://image.chanhvinh.com/anh/dow/m/dow-340-1.webp)