segger

Flasher Portable PLUS Programmer Supported Processors Features Supplied with THÔNG SỐ KỸ THUẬT For Use With Flash microcontrollers

SEGGER J-Trace Pro Cortex Features and Benefits: Applications: Certifications: THÔNG SỐ KỸ THUẬT Product Type Debugger For Use With Cor...

J-Link 19-Pin Cortex-M Adapter The J-Link 19-pin Cortex-M Adapter allows JTAG, SWD and SWO connections between J-Link and ARM Cortex-M based targ...

J-Link 9-Pin Cortex-M Adapter The J-Link 9-pin Cortex-M Adapter allows JTAG, SWD and SWO connections between J-Link and ARM Cortex-M based target...

The SEGGER J-Link 14-Pin TI Adapter converts the 20-pin, 0.1 inch standard connector to a 14-pin, 0.1 inch Texas Instruments connector. Includes ...

J-Link 10-Pin Needle Adapter The J-Link 10-pin Needle Adapter has been designed to connect a J-Link Probe to a PCB which does not have a mating c...

The SEGGER J-Link TI-CTI-20 Adapter has been designed to connect from the standard J-Link/J-Trace/Flasher 20-pin 0.1" target connector to TI CTI-...

The SEGGER Adapter for PPC targets with 14-pin 0.1" mating JTAG connectors. Includes a 14-pin ribbon cable .THÔNG SỐ KỸ THUẬT: Accessory...

The SEGGER J-Link Mictor 38 Adapter connects the standard 20-pin 0.1" J-Link interface to the 38-pin Mictor interface. The pinout follows the sin...

THÔNG SỐ KỸ THUẬT Accessory Type Adapter For Use With J-Link Probes

The SEGGER J-Link RX FINE Adapter converts the 20-pin, 0.1 inch standard connector to a 14-pin, 0.1 inch RX FINE connector. Includes the necessar...

The SEGGER J-Link 2mm Adapter converts the 20-pin, 0.1 inch pitch standard J-Link connector to a 20-pin, 2mm pitch connector. The J-Link 2mm Adap...

The SEGGER J-Link Signal Smoothing Adapter can be inserted between the J-Link debug probe and the debug target to overcome signal integrity issue...

The SEGGER J-Link Measurement+Patch Adapter provides test points for all debug signals to allow easy access for test probes. It has a standard 20...

The SEGGER Intel FPGA Adapter (formerly J-Link Altera Adapter) connects to the 10-pin 100-mil Intel FPGA JTAG connector providing debug access to...

The SEGGER J-Link 6-pin Needle Adapter has been designed to connect J-Link to a PCB which does not come with a mating connector or programming he...

The SEGGER J-Link SiLabs C2 Adapter converts the 20-pin, 0.1 inch pitch standard J-Link connector to a 10-pin, 0.1 inch pitch SiLabs C2 connector...

J-Link Target Supply Adapter The J-Link Target Supply Adapter provides an adjustable power supply to a target board. Compatible Probes Segger J-L...

The SEGGER Adapts from the standard J-Link 20-pin 0.1" target connector to Xilinx 14-pin 2 mm connector (comp. Platform Cable USB II). Package in...

The Flasher RL78 Adapter converts the standard J-Link 20-pin 0.1" connector to the standard 14-pin E1 connector defined by Renesas. Please note th...

SEGGER Microcontroller Adapter The SEGGER Microcontroller adapter is J-Trace MICTOR 38 adapter that connects to the 38-pin MICTOR connector. It c...

The SEGGER Flasher STM8 Adapter converts the standard J-Link 20-pin 0.1" connector to the SWIM connector and a standard 10-pin connector. In addi...

The SEGGER J-Link Microchip 2-Wire JTAG TDI Adapter allows debug connections between J-Link and target hardware which comes with Microchip IS208x...

The SEGGER SiFive-ARTY Adapter allows debug connections between J-Link and the ARTY board running SiFive RISC-V core bitstreams. The ARTY board p...