DOW3-6121SIL 3-6121
Keo đổ bọc và bọc silicone DOWSIL™ 3-6121 Low Temperature Elastomer. Keo bọc silicone hai thành phần, bán trong suốt, dùng để đổ bọc các cụm mạch in. Tỷ lệ 10:1, ở dạng lỏng có thể chảy trước khi đóng rắn và tạo thành elastomer dẻo giữ được tính chất tốt ở nhiệt độ thấp đến -65 °C. Lịch đóng rắn nhiệt có thể điều chỉnh để phù hợp với các yêu cầu chu kỳ sản xuất khác nhau. Silicone hai thành phần; tỷ lệ trộn 10:1; bán trong suốt; độ nhớt hỗn hợp 19.250 mPa·s; hoạt động đến -65 °C. Trước gia công: Độ nhớt hỗn hợp 19.250 mPa·s (giá trị điển hình để đánh giá khả năng điểm keo và lấp đầy); thời gian làm việc >2 giờ (thời gian sống của hỗn hợp ở 25 °C, tính đến khi độ nhớt tăng gấp đôi); tỷ lệ trộn 10:1, hai thành phần lỏng phải được trộn kỹ trước khi điểm keo và đóng rắn. Bảng thông số: Dạng sản phẩm: keo bọc silicone lỏng hai thành phần; màu: bán trong suốt; tỷ lệ trộn 10:1; độ nhớt Phần A 33.475 mPa·s; độ nhớt hỗn hợp 19.250 mPa·s sau khi trộn kỹ; thời gian làm việc >2 giờ ở 25 °C. Các giá trị chỉ mang tính tham khảo, không dùng làm thông số kỹ thuật. Gia công: trộn, điểm keo và đóng rắn. Trộn kỹ hai thành phần lỏng trước khi điểm keo.
Silicone potting and encapsulation DOWSIL™ 3-6121 Low Temperature Elastomer A two-part, translucent silicone encapsulant for potting printed circuit board system assemblies. The 10:1 material is flowable before cure and forms a flexible elastomer that retains good properties at temperatures down to -65°C. Temperature-controlled heat-cure schedules support different production-cycle requirements. Two-part silicone 10:1 mix ratio Translucent 19,250 mPa·s mixed viscosity Performance down to -65°C Two-part DOWSIL™ 3-6121 Low Temperature Elastomer for electronic potting and encapsulation. Before processing As-supplied properties Mixed viscosity 19,250 mPa·s Typical mixed-state value for evaluating dispensing and cavity-filling behavior. Working time >2 hours Typical pot life at 25°C, defined by the time required for the mixed viscosity to double. Mix ratio 10:1 Two liquid components must be thoroughly mixed before dispensing and cure. Property Typical value Unit State / condition Product form Two-part liquid silicone encapsulant — As supplied Color Translucent — Mixed material Mix ratio 10:1 — Two-component system Part A viscosity 33,475 mPa·s Part A or base Mixed viscosity 19,250 mPa·s After thorough mixing Working time >2 hours Pot life at 25°C Values shown are typical and are not intended for use as product specifications. Processing Mixing, dispensing and curing Thoroughly mix the two liquid components before dispensing.

















![DOWSIL 3-6121 [3-6121]](https://image.chanhvinh.com/anh/dow/m/dow-3-6121-1.webp)