DOWMOLYKOTE 4MOLYKOTE 4
Chất bôi trơn và làm kín cách điện MOLYKOTE® 4 Electrical Insulating Compound là hợp chất gốc silicone dạng bán lỏng, dùng để bôi trơn, làm kín và cách điện cho đầu nối, cực đấu, phớt cao su, gioăng O-ring và các mối ghép kim loại–polyme hoặc kim loại–cao su. Sản phẩm có dải nhiệt độ làm việc từ -54°C đến 200°C đã được ghi nhận, đi kèm khả năng chống ẩm, bay hơi thấp và dữ liệu về điện môi, điện trở suất và chịu hồ quang theo từng điều kiện. Hợp chất silicone bán lỏng -54°C đến 200°C 338 V/mil ở 50 mil Chống ẩm Thi công bằng tay, cọ, lau hoặc bơm định lượng đã kiểm chứng MOLYKOTE® 4 được cung cấp dưới dạng hợp chất silicone bán lỏng, màu xám nhạt đến trắng trong. Tính chất ở trạng thái cung cấp Độ đặc 200–250 mm/10 Độ xuyên không tải điển hình theo ASTM D217; độ xuyên sau 60 lần tối đa là 310 mm/10. Dải nhiệt độ -54°C đến 200°C Dải làm việc đã được ghi nhận của sản phẩm; hoạt động thực tế còn phụ thuộc vào cấu trúc, điều kiện phơi nhiễm, cặp vật liệu và điều kiện vận hành. Khả năng giữ mỡ ở nhiệt độ cao Bay hơi 1,1% Bay hơi điển hình sau 30 giờ ở 204°C; tách dầu trong cùng thời gian và nhiệt độ là 4,4%.
Electrical insulating lubricant and sealant MOLYKOTE® 4 Electrical Insulating Compound A semi-flowable silicone-based compound for lubricating, sealing, and electrically insulating connectors, terminals, elastomer seals, O-rings, and mixed metal-to-polymer or metal-to-rubber interfaces. It combines a -54°C to 200°C documented temperature range with moisture resistance, low evaporation, and condition-specific dielectric, resistivity, and arc-resistance data. Semi-flowable silicone compound -54°C to 200°C 338 V/mil at 50 mil Moisture resistant Hand, brush, wipe, or validated dispense MOLYKOTE® 4 is supplied as a light-gray to translucent-white, semi-flowable silicone compound. As-supplied compound properties Consistency 200–250 mm/10 Typical ASTM D217 unworked penetration; worked penetration after 60 strokes is 310 mm/10 maximum. Temperature range -54°C to 200°C Documented product range; actual behavior remains dependent on the assembly, exposure, material pair, and operating conditions. High-temperature retention 1.1% evaporation Typical evaporation after 30 hours at 204°C; bleed under the same duration and temperature is 4.4%.

















![MOLYKOTE 4 [MOLYKOTE 4]](https://image.chanhvinh.com/anh/dow/m/dow-molykote-4-1.webp)