KNITTER-SWITCHPush Button Bezel for use with MPA Push Button Switches, MPE Push Button Switches, 51631

Knitter-Switch Miniature Push Button Switches - MPA & MPE Series

Knitter-Switch MPA and waterproof MPE series of miniature Push Button switches are available in a choice of SPDT or DPDT contact configurations with momentary or alternate switching functions and solder terminals.

Both the MPA and the IP67 waterproof MPE switches are designed to be panel mounted. They have a contact resistance less than 10mΩ and an insulation resistance greater than 1000MΩ. They are epoxy sealed with a flux proof construction.

Accessories for the MPA and the waterproof MPE miniature Push Button switches include a brass chromium-plated bezel and a 15mm diameter black actuator button, see stock number 134-2462.

Momentary or alternate switching

Waterproof IP67 rated - MPE series only

Maximum switch rating of 6A at 125Vac, 3A at 250Vac

Silver plated contacts

M6 bush

Solder terminals

Contact resistance <10mΩ maximum

Dielectric strength 1500Vac for 1 minute

Insulation resistance 1000MΩ minimum

Mechanical life >30,000 operations

Operating temperature range -45 to +140°C

Note

Actuator button is not supplied with the switch and must be ordered separately. For a suitable 15mm black button see stock number 7830053

Momentary switches have the momentary state displayed in brackets, e.g. on - (on).

Supplied with

Mounting hardware.