LOCTITEABLESTIK 2113ABLESTIK 2113
Tính chất kỹ thuật. Tính chất khi cung cấp / trước khi xử lý: Tính chất điển hình của vật liệu hỗn hợp chưa đóng rắn. Tỷ lệ trộn (nhựa : chất đóng rắn) 100 : 11 theo khối lượng; Độ nhớt hỗn hợp 300 mPa·s (cP) ở 25°C; Tỷ trọng riêng hỗn hợp 1,16; Thời gian sử dụng 30 phút (vật liệu hỗn hợp). Tính chất sau xử lý / trạng thái hoàn thiện: Tính chất điển hình của vật liệu đã đóng rắn hoàn toàn theo lịch đóng rắn khuyến nghị. Độ cứng 88 Shore D; Nhiệt độ chuyển thuỷ tinh (Tg) 77,0 °C; Độ bền điện môi 410 volt/mil; Điện trở suất thể tích 6,00×10¹³ ohm·cm ở 25°C; Độ bền cắt chồng nhôm-nhôm 15 (2.200) N/mm² (psi); mẫu đóng rắn 2 giờ ở 65°C.
Technical properties As-supplied / before-processing properties Typical properties of the uncured, mixed material prior to cure. Property Value Unit Method / condition Mix ratio (Resin : Hardener) 100 : 11 by weight — Viscosity, mixed 300 mPa·s (cP) @ 25°C, mixed Specific gravity, mixed 1.16 — Mixed material Pot life 30 minutes Mixed material Technical properties After-processing / final-state properties Typical properties of the fully cured material after the recommended cure schedule. Property Value Unit Method / condition Hardness 88 Shore D Cured material Glass transition temperature (Tg) 77.0 °C Cured material Dielectric strength 410 volts/mil Cured material Volume resistivity 6.00×10¹³ ohm·cm @ 25°C Lap shear strength, Al to Al 15 (2,200) N/mm² (psi) Sample cured 2 hr @ 65°C

















![LOCTITE ABLESTIK 2113 [ABLESTIK 2113]](https://image.chanhvinh.com/anh/loctite/m/loctite-ablestik-2113-1.webp)