LOCTITEABLESTIK 2115ABLESTIK 2115
Keo epoxy cho liên kết quang học và chính xác. LOCTITE ABLESTIK 2115 BIPAX: LOCTITE ABLESTIK 2115 BIPAX là keo epoxy hai thành phần, trong suốt, dùng để liên kết chính xác các linh kiện quang học khi độ chính xác căn chỉnh quan trọng. Keo kết hợp độ nhớt thấp và độ co ngót thấp với khả năng chịu va đập cơ học và chu kỳ nhiệt độ, liên kết được thuỷ tinh, nhựa cứng, gốm và kim loại, và được cung cấp trong bao bì BIPAX để trộn có kiểm soát. Epoxy hai thành phần; Trong suốt; Độ nhớt thấp; Độ co ngót thấp. Thông số kỹ thuật. Tính chất điển hình trước khi đóng rắn: Các giá trị dưới đây mô tả tỷ lệ trộn hoặc keo đã trộn trước khi đóng rắn. Giá trị của vật liệu hỗn hợp được tách riêng khỏi trạng thái của từng thành phần nhựa và chất đóng rắn. Giá trị mang tính điển hình. LOCTITE ABLESTIK 2115 BIPAX, tính chất điển hình trước khi đóng rắn: Tỷ lệ trộn, nhựa : chất đóng rắn 100 : 30 theo khối lượng; Độ nhớt hỗn hợp 250 cP ở 25°C, sau khi trộn; Chỉ số thixotropy 1,0; Tỷ trọng riêng hỗn hợp 1,22 (vật liệu hỗn hợp). Gia công: Trộn, thi công và đóng rắn. LOCTITE ABLESTIK 2115 BIPAX được cung cấp trong bao bì có bộ trộn và phân phối. Các yếu tố chính cần lưu ý khi gia công gồm: chuẩn bị bề mặt, trộn kỹ các thành phần, thời gian làm việc sau khi trộn, giữ tiếp xúc giữa các bề mặt được liên kết, và lựa chọn chế độ đóng rắn ở nhiệt độ phòng hoặc nhiệt độ cao. Chuẩn bị bề mặt: Làm sạch và làm khô cẩn thận tất cả các bề mặt trước khi trộn hoặc thi công keo.
Optical and Precision Bonding Epoxy Adhesives LOCTITE ABLESTIK 2115 BIPAX LOCTITE ABLESTIK 2115 BIPAX is a two-component, clear epoxy adhesive for precision bonding of optical components where alignment accuracy is important. It combines low viscosity and low shrinkage with mechanical shock and temperature-cycling resistance, bonds glass, rigid plastics, ceramic, and metals, and is supplied in BIPAX packaging for controlled mixing. Two-component epoxy Clear Low viscosity Low shrinkage Technical properties Typical pre-cure properties Values below describe the mix ratio or mixed adhesive before cure. Mixed-material values are kept distinct from the separate resin and hardener component states. Values are typical. LOCTITE ABLESTIK 2115 BIPAX typical pre-cure properties Property Value Unit Method / condition Mix ratio, resin : hardener 100 : 30 by weight Mixing ratio Viscosity, mixed 250 cP At 25 deg C, after mixing Thixotropic index 1.0 - Mixed material Specific gravity, mixed 1.22 - Mixed material Processing Mixing, application and cure LOCTITE ABLESTIK 2115 BIPAX is supplied in a mixing-dispenser package. Surface preparation, thorough component mixing, the available working period after mixing, maintaining contact between the bonded surfaces, and selection of the room-temperature or elevated-temperature cure schedule are the principal processing considerations. Surface preparation: Carefully clean and dry all surfaces before mixing or applying the adhesive.

















![ABLESTIK 2115 [ABLESTIK 2115]](https://image.chanhvinh.com/anh/loctite/m/loctite-ablestik-2115-1.webp)