Skip to content

Microchip TechnologyPIC16F18857-I/SPIC: PIC microcontroller

ADCs 24 x 10 bitDevice Core 8 bit CPUFamily Name PIC16Instruction Set Architecture RISC
Mã nhà sản xuất
PIC16F18857-I/SP
Thương hiệu
Mã kho
146-8938
Liên hệ
📩 Liên hệ để có giá tốt: [email protected]

PIC16F1885x/1887x 8-Bit Microcontrollers The PIC16F range of Microcontrollers from Microchip are 8-bit MCUs that incorporate Microchip's PIC® architecture into a variety of pin and package options. PIC16F1885x/1887xx Microcontrollers are based on Microchip's Enhanced Mid-Range core and are the first to include multiple new Low-Power features. IDLE and DOZE modes have been added along with Peripheral Module Disable, this allows peripherals to be removed from the power rail and clock tree for zero power leakage. Additionally these devices are Microchip's first PIC MCUs to incorporate an Analogue-to-Digital Converter with computation (ADC2). Functions like accumulation, averaging and low-pass filter calculations are completed in the ADC hardware instead of the MCU software, freeing up the CPU to sleep or complete other tasks. Microcontroller Features 32 MHz Max. CPU Speed 49 Instructions 16 Level Hardware Stack Internal Oscillator 25 or 36 I/O Pins Power-On Reset (POR) Configurable Power-Up Timer (PWRTE) Brown-Out Reset (BOR) and Low-Power Brown-Out Reset (LPBOR) Windowed Watchdog Timer (WWDT) In-Circuit Serial Programming (ICSP) In-Circuit Debug (ICD) Low-Voltage Programming (LVP) Peripheral Pin Select (PPS) Power Saving Features Peripheral Module Disable (PMD) – Ability to disable unused peripherals for minimal power consumption SLEEP, IDLE and DOZE Low Power Modes Sleep mode: 50 nA @ 1.8V (typical) Watchdog Timer: 500 nA @ 1.8V (typical) Secondary Oscillator: 500 nA @ 32 kHz Operating Current: 8 μA @ 32 kHz 1.8V (typical) Peripheral Features 10-bit Analogue-to-Digital Converter with Computation (ADC2) – PIC16F18855 25 Channels; PIC16F18875 36 Channels 5-Bit Digital-to-Analogue Converter (DAC) Two Comparators (COMP) Voltage Reference Four Configurable Logic Cells (CLC) Complementary Waveform Generator (CWG): Five Capture/Compa10re/PWM (CCP) modules Two 10-bit PWMs Numerically Controlled Oscillator (NCO) Two Signal Measurement Timers (SMT) Cyclical Redundancy Check (CRC/SCAN) EUSART, RS-232, RS-485, LIN compatible Interfaces Two SPI Interfaces Two I2C, SMBus, PMBus™ Compatible Interfaces Data Signal Modulator (DSM) Three 8-bit Timers with Hardware Limit Timer (HLT) Four 16-bit Timers PIC16(L)F1885X/7X microcontrollers feature Analog, Core Independent Peripherals and communication peripherals, combined with extreme Low Power (XLP) for a wide range of general purpose and low-power applications. The family features the CRC/SCAN, HLT and Windowed WDT to support customers looking to add safety to their application. Enhanced Mid-range Core with 49 Instruction, 16 Stack Levels Adjustable Internal Oscillator (1-32MHz) 2x 10-bit PWMs 5x Capture, Compare, PWM (CCP) Complementary Waveform Generator (CWG) Numerically Controlled Oscillator (NCO) 4x Configurable Logic Controller (CLC) 10-bit ADC with Computation (ADC2) 5-bit Digital to Analog Converter (DAC) Data Signal Modulator (DSM) Zero Cross Detect (ZCD) Cyclical Redundancy Check (CRC/SCAN) Windowed Watchdog Timer (WWDT) Peripheral Pin Select (PPS)

PIC16F1885x/1887x 8-Bit Microcontrollers

The PIC16F range of Microcontrollers from Microchip are 8-bit MCUs that incorporate Microchip's PIC® architecture into a variety of pin and package options.

PIC16F1885x/1887xx Microcontrollers are based on Microchip's Enhanced Mid-Range core and are the first to include multiple new Low-Power features. IDLE and DOZE modes have been added along with Peripheral Module Disable, this allows peripherals to be removed from the power rail and clock tree for zero power leakage.

Additionally these devices are Microchip's first PIC MCUs to incorporate an Analogue-to-Digital Converter with computation (ADC2). Functions like accumulation, averaging and low-pass filter calculations are completed in the ADC hardware instead of the MCU software, freeing up the CPU to sleep or complete other tasks.

Microcontroller Features

32 MHz Max. CPU Speed

49 Instructions

16 Level Hardware Stack

Internal Oscillator

25 or 36 I/O Pins

Power-On Reset (POR)

Configurable Power-Up Timer (PWRTE)

Brown-Out Reset (BOR) and Low-Power Brown-Out Reset (LPBOR)

Windowed Watchdog Timer (WWDT)

In-Circuit Serial Programming (ICSP)

In-Circuit Debug (ICD)

Low-Voltage Programming (LVP)

Peripheral Pin Select (PPS)

Power Saving Features

Peripheral Module Disable (PMD) – Ability to disable unused peripherals for minimal power consumption

SLEEP, IDLE and DOZE Low Power Modes

Sleep mode: 50 nA @ 1.8V (typical)

Watchdog Timer: 500 nA @ 1.8V (typical)

Secondary Oscillator: 500 nA @ 32 kHz

Operating Current: 8 μA @ 32 kHz 1.8V (typical)

Peripheral Features

10-bit Analogue-to-Digital Converter with Computation (ADC2) – PIC16F18855 25 Channels; PIC16F18875 36 Channels

5-Bit Digital-to-Analogue Converter (DAC)

Two Comparators (COMP)

Voltage Reference

Four Configurable Logic Cells (CLC)

Complementary Waveform Generator (CWG):

Five Capture/Compa10re/PWM (CCP) modules

Two 10-bit PWMs

Numerically Controlled Oscillator (NCO)

Two Signal Measurement Timers (SMT)

Cyclical Redundancy Check (CRC/SCAN)

EUSART, RS-232, RS-485, LIN compatible Interfaces

Two SPI Interfaces

Two I2C, SMBus, PMBus™ Compatible Interfaces

Data Signal Modulator (DSM)

Three 8-bit Timers with Hardware Limit Timer (HLT)

Four 16-bit Timers

PIC16(L)F1885X/7X microcontrollers feature Analog, Core Independent Peripherals and communication peripherals, combined with extreme Low Power (XLP) for a wide range of general purpose and low-power applications. The family features the CRC/SCAN, HLT and Windowed WDT to support customers looking to add safety to their application.

Enhanced Mid-range Core with 49 Instruction, 16 Stack Levels

Adjustable Internal Oscillator (1-32MHz)

2x 10-bit PWMs

5x Capture, Compare, PWM (CCP)

Complementary Waveform Generator (CWG)

Numerically Controlled Oscillator (NCO)

4x Configurable Logic Controller (CLC)

10-bit ADC with Computation (ADC2)

5-bit Digital to Analog Converter (DAC)

Data Signal Modulator (DSM)

Zero Cross Detect (ZCD)

Cyclical Redundancy Check (CRC/SCAN)

Windowed Watchdog Timer (WWDT)

Peripheral Pin Select (PPS)

THÔNG SỐ KỸ THUẬT
Manufacturer Microchip
Manufacturer Part No. PIC16F18857-I/SP
Family Name PIC16
Package Type SPDIP
Mounting Type Through Hole
Pin Count 28
Device Core 8 bit CPU
Data Bus Width 8bit
Program Memory Size 56 kB
Maximum Frequency 32MHz
RAM Size 256 B
USB Channels 0
Number of PWM Units 1 x 10 bit
Number of SPI Channels 2
Typical Operating Supply Voltage 2.3 → 5.5 V
Number of USART Channels 1
Number of I2C Channels 2
Number of UART Channels 0
Number of CAN Channels 0
Number of PCI Channels 0
Number of Ethernet Channels 0
Number of LIN Channels 0
Height 3.81mm
Width 7.49mm
Dimensions 35.56 x 7.49 x 3.81mm
Maximum Operating Temperature +85°C
Number of ADC Units 1
Program Memory Type Flash
Length 35.56mm
ADCs 24 x 10 bit
Maximum Number of Ethernet Channels 0
Instruction Set Architecture RISC
Pulse Width Modulation 1 (2 x 10 bit)
Minimum Operating Temperature -40°C

Giá: Liên hệ – gửi mã và số lượng về [email protected] để nhận báo giá nhanh.

Compare products

Select 2 or 3 items to compare

Select first item to compare

Select second item to compare

Select third item to compare

Compare