Microchip TechnologyPIC18LF4620-I/PTIC: PIC microcontroller
The Microchip PIC18LF4620 flash microcontroller has C compiler optimized RISC architecture with nano Watt technology. It operates on 2.0V to 5.5V voltage range. This microcontroller has 64KBytes flash program memory, 3968Bytes SRAM and 1024 EEPROM. 100,000 Erase/Write Cycle Enhanced Flash Program Memory Typical 1,000,000 Erase/Write Cycle Data EEPROM Memory Typical Flash/Data EEPROM Retention of 100 Years Typical Self-Programmable under Software Control Priority Levels for Interrupts 8 x 8 Single-Cycle Hardware Multiplier Single-Supply 5V In-Circuit Serial Programming™ (ICSP™) via Two Pins In-Circuit Debug (ICD) via Two Pins Programmable Brown-out Reset (BOR) with Software Enable Option High-Current Sink/Source 25 mA/25 mA Three Programmable External Interrupts Four Input Change Interrupts Up to 2 Capture/Compare/PWM (CCP) modules, one with Auto-Shutdown (28-pin devices) One, two or four PWM outputs Selectable polarity Programmable dead time Auto-shutdown and auto-restart Master Synchronous Serial Port (MSSP) module Supporting 3-Wire SPI (all 4 modes) and I2C™ Master and Slave modes Dual Analog Comparators with Input Multiplexing Temperature range between -40°C and +85°C TQFP (Thin Quad Flatpack) package
The Microchip PIC18LF4620 flash microcontroller has C compiler optimized RISC architecture with nano Watt technology. It operates on 2.0V to 5.5V voltage range. This microcontroller has 64KBytes flash program memory, 3968Bytes SRAM and 1024 EEPROM.
100,000 Erase/Write Cycle Enhanced Flash Program Memory Typical
1,000,000 Erase/Write Cycle Data EEPROM Memory Typical
Flash/Data EEPROM Retention of 100 Years Typical
Self-Programmable under Software Control
Priority Levels for Interrupts
8 x 8 Single-Cycle Hardware Multiplier
Single-Supply 5V In-Circuit Serial Programming™ (ICSP™) via Two Pins
In-Circuit Debug (ICD) via Two Pins
Programmable Brown-out Reset (BOR) with Software Enable Option
High-Current Sink/Source 25 mA/25 mA
Three Programmable External Interrupts
Four Input Change Interrupts
Up to 2 Capture/Compare/PWM (CCP) modules, one with Auto-Shutdown (28-pin devices)
One, two or four PWM outputs
Selectable polarity
Programmable dead time
Auto-shutdown and auto-restart
Master Synchronous Serial Port (MSSP) module Supporting 3-Wire SPI (all 4 modes) and I2C™ Master and Slave modes
Dual Analog Comparators with Input Multiplexing
Temperature range between -40°C and +85°C
TQFP (Thin Quad Flatpack) package