Skip to content

RECOMR-78C9.0-1.0Converter: DC/DC

Efficiency 90%Input Voltage 12 → 42 V dcLine Regulation ±0.2%Load Regulation ±0.4%
Mã nhà sản xuất
R-78C9.0-1.0
Thương hiệu
Mã kho
739-8294
Liên hệ
📩 Liên hệ để có giá tốt: CV@chanhvinh.com

R-78Cxx 1.0L Series Single Output DC/DC Converter The Recom R-78Cxx series are highly efficient, non-isolated switching regulators are ideally suited to replace the 1 Amp 78xx linear regulators, as well as being pin compatible. The convertor has a high-voltage input range and there is no need for heat sinks, due to little energy being wasted. It has a wide input range with short circuit protection and thermal shutdown. Features and Benefits Low profile Pin compatible with LM78xx linear regulators High efficiency, non-isolated, no need for heatsinks Fully protected for short circuit Positive to negative convertor Low ripple and noise Note MTBF to MIL-HDBK 217F Power derates above 68°C Standards General safety: EN 60950-1:2006 + A11:2009 + A1:2010 Standby power: EN62301:2005 RECOM Switching Regulator, 12 to 42V DC Input Voltage Range, 9V DC Output Voltage - R-78C-1.0 Series - R-78C9.0-1.0 Need a reliable way to control the output voltage of your industrial equipment? Use this switching regulator from RECOM. It steps down input voltages between 12 and 42V DC to a lower output voltage of 9V DC for use in low-power systems. Thanks to its high efficiency of 90 to 95%, it loses minimal power as heat, so there's no need to install a heat sink. This device has a wide operating temperature range of -40°C to +85°C, making it suitable for use in demanding environments. Built-in short circuit protection means you can rely on it to protect downstream devices against electrical damage. Features & Benefits Non-conductive plastic case to reduce the risk of electric shocks during installation and maintenance Light weight of 2g to minimise strain on your equipment Mean time between failures of 8,600,000 hours at +25°C for long-lasting performance Applications Aviation industry Consumer electronics Telecommunications systems What's the load regulation of this unit? This switching regulator has a load regulation of ±0.4%, meaning it maintains a constant output voltage for reliable performance.

R-78Cxx 1.0L Series Single Output DC/DC Converter

The Recom R-78Cxx series are highly efficient, non-isolated switching regulators are ideally suited to replace the 1 Amp 78xx linear regulators, as well as being pin compatible.

The convertor has a high-voltage input range and there is no need for heat sinks, due to little energy being wasted. It has a wide input range with short circuit protection and thermal shutdown.

Features and Benefits

  • Low profile
  • Pin compatible with LM78xx linear regulators
  • High efficiency, non-isolated, no need for heatsinks
  • Fully protected for short circuit
  • Positive to negative convertor
  • Low ripple and noise

Note

MTBF to MIL-HDBK 217F

Power derates above 68°C

Standards

General safety: EN 60950-1:2006 + A11:2009 + A1:2010

Standby power: EN62301:2005

RECOM Switching Regulator, 12 to 42V DC Input Voltage Range, 9V DC Output Voltage - R-78C-1.0 Series - R-78C9.0-1.0

Need a reliable way to control the output voltage of your industrial equipment? Use this switching regulator from RECOM. It steps down input voltages between 12 and 42V DC to a lower output voltage of 9V DC for use in low-power systems. Thanks to its high efficiency of 90 to 95%, it loses minimal power as heat, so there's no need to install a heat sink. This device has a wide operating temperature range of -40°C to +85°C, making it suitable for use in demanding environments. Built-in short circuit protection means you can rely on it to protect downstream devices against electrical damage.

Features & Benefits

  • Non-conductive plastic case to reduce the risk of electric shocks during installation and maintenance
  • Light weight of 2g to minimise strain on your equipment
  • Mean time between failures of 8,600,000 hours at +25°C for long-lasting performance

Applications

  • Aviation industry
  • Consumer electronics
  • Telecommunications systems

What's the load regulation of this unit?

This switching regulator has a load regulation of ±0.4%, meaning it maintains a constant output voltage for reliable performance.

THÔNG SỐ KỸ THUẬT
Manufacturer Recom
Manufacturer Part No. R-78C9.0-1.0
Output Voltage 9V dc
Output Current 1A
Input Voltage 12 → 42 V dc
Mounting Type Through Hole
Number of Outputs 1
Package SIP 3
Power Rating 9W
Efficiency 90%
Ripple And Noise 100mV Pk-Pk
Minimum Temperature -40°C
Maximum Temperature +85°C
Series R-78C-1.0
Line Regulation ±0.2%
Length 11.6mm
Weight 2g
Load Regulation ±0.4%
Depth 10.4mm
MTBF 3.88e+06h
Width 8.5mm

Giá: Liên hệ – gửi mã và số lượng về CV@chanhvinh.com để nhận báo giá nhanh.

Compare products

Select 2 or 3 items to compare

Select first item to compare

Select second item to compare

Select third item to compare

Compare