SCHURTER3101.0125Fuse holder

Schurter 5x20mm Fuseholders – FPG Series Schurter FPG series fuseholders are a robust and dependable solution to a range of fuse requirements. Available with either a slotted or fingergrip plug, the Schurter FPG fuseholder series offers increased versatility of choice. Applications include industrial electronics, household appliances and medical equipment. Terminals: 4.8x0.5mm Protection: PC2 Sealed from the rear Thermoplastic body Tin-plated brass contacts Approvals UL & CSA (16A/250V), VDE & SEMKO (10/250V) Schurter FPG2 Series Manual Cap Panel Mount Fuse Holder The Schurter FPG2 series 16A panel mount fuse holder offers current and voltage rating of 16A and 250VAC respectively. The body of this holder is made of thermoplastic material and tin plated copper alloy is used for contact. It has screw type fuse carriers. Features and Benefits Compact design Compatible fuse dimension is 5mmx20mm Low insertion resistance due to contact material Sealed from the rear Solder terminal type Applications Household appliances Industrial electronics Medical equipment Certifications CSA certified IEC60127-6 certified IP40 rated IP67 rated UL 4248-1 approved VDE approved Panel Mounting CATEGORIES OF PROTECTION AGAINST ELECTRIC SHOCK,PC1: No integral protection against electric shock. If required, designers must provide additional protection against electric shock on equipment.,PC2: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 standard test finger, when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.,PC3: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 1mm diameter rigid test wire when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.