Skip to content

SICKPBSH-RB010ST1S0D5A0ZPBSH Series Pressure Sensor, 0bar Min, 10bar Max, 2 x PNP Output, Gauge Reading

Accuracy ± 1 %Analogue Output 4 → 20 mACommunication Protocol IO-LINKElectrical Connection M12 Round Connector
Mã nhà sản xuất
PBSH-RB010ST1S0D5A0Z
Thương hiệu
Quy cách đóng gói
1 cái
Liên hệ
📩 Liên hệ để có giá tốt: CV@chanhvinh.com 📄 Datasheet (PDF)

Overview

The electronic pressure switch PBS Hygienic has been designed for use in the food and beverage industry. The wetted parts are gap-free and have no dead spaces. Their high-quality stainless steel surfaces are smooth and easy to clean. The highly resistant stainless steel membrane is welded to the hygienic process connection without gaps or edges. The device is designed for CIP and SIP processes. This enables safe hygienic operation in conjunction with optimized system throughput.

The PBS Hygienic is available with up to two switching outputs, an analogue output and IO-Link in a single device. Its intuitive configuration via three large pushbuttons and display facilitates operation. The housing can be rotated in two ways, allowing the display and electrical connection to be aligned according to specific installation situation. Available with a variety of measuring ranges and process connections, the PBS Hygienic is suitable for universal use.

At a glance

Hygienically-graded pressure switch with display for the food and beverage industry

Wetted parts are made from stainless steel 1.4435

Individually programmable switching outputs and analogue output

Pressure values are indicated on the display

Unit of pressure value in the display can be switched

Output states are indicated separately via large LEDs

IO-Link

Your Benefit

Safe hygienic operation due to flush-mounted, highly resistant stainless steel membrane and hygienic process connections

Suitability for CIP and SIP ensures high system availability

Safe and easy setup with three large pushbuttons and legible, rotatable display

Rotatable housing for optimum cable routing

Wide range of available configurations enable customer-specific solutions

High reliability: Corrosion-resistant design of wetted parts and housing with IP 65 and IP 67 enclosure ratings

Ultimate system availability: IO-Link enables fast, reliable parameter setting when changing over products

Applications

Factory automation applications:

Pressure measurement at the heat exchanger of a CIP system

Level measurement in storage tanks

Supply of compressed air in the blowing process

THÔNG SỐ KỸ THUẬT
Manufacturer SICK
Manufacturer Part No. PBSH-RB010ST1S0D5A0Z
Pressure Reading Type Gauge
Minimum Pressure Reading 0bar
Maximum Pressure Reading 10bar
Accuracy ± 1 %
Output Type 2 x PNP
Media Measured Gaseous, Liquid
Process Connection Tri Clamp
Analogue Output 4 → 20 mA
Electrical Connection M12 Round Connector
Communication Protocol IO-LINK
Response Time 3ms
Series PBSH
Supply Voltage 15 → 35 V dc
Housing Material Buttons - TPE-E, Display Window - PC, Lower Body - Stainless Steel 304, Plastic Head - PC + ABS
Maximum Operating Temperature +100°C
Minimum Operating Temperature -20°C
IP Rating IP65, IP67

Giá: Liên hệ – gửi mã và số lượng về CV@chanhvinh.com để nhận báo giá nhanh.

Compare products

Select 2 or 3 items to compare

Select first item to compare

Select second item to compare

Select third item to compare

Compare
📄 Datasheet SICK PBSH Series Pressure Sensor, 0bar Min, 10bar Max, 2 x PNP Outp... (PDF)