Skip to content

STMICROELECTRONICSEVALSTPM32EVALSTPM32

Featured Device STEVAL-IPE023V1Dùng cho Shunt Current Sensor Based on the STPM32Kit Classification Evaluation BoardTên bo Single-Phase Energy Metering Evaluation Board
Mã nhà sản xuất
EVALSTPM32
Thương hiệu
Quy cách đóng gói
1 cái
Mã kho
1888270
Liên hệ
📩 Liên hệ để có giá tốt: CV@chanhvinh.com 📄 Datasheet (PDF)

The STPM32 energy metering evaluation board is a class 0.2, single-phase meter with shunt current sensor for power line systems with Vnom= 140 to 300 V(RMS), Inom/ Imax= 5/100 A(RMS), flin= 50/60 Hz ± 10% and Tamb= -40 to +85 °C.

Measured active/reactive power can be output from two programmable LEDs on the board. The board can be interfaced with a PC running evaluation software through an isolated RS232 port, or through the STEVAL-IPE023V1 USB isolated interface tool for configuration and data reading. The board also has SPI/UART pins available to interface a microcontroller for application development.

0.2% accuracy single-phase meter

Vnom(RMS) = 140 to 300 V, Inom/Imax(RMS)= 5/100 A, flin= 50/60 Hz ± 10%

Connector for USB isolated hardware programmer tool STEVAL-IPE023V1 and PC GUI

RS232 and UART isolated connectors to PC GUI

SPI/UART switch for device peripheral selection

2 programmable LEDs on board

Digital expansion to external system-on-chip or MCU

3.3 V power supply: external or through STEVAL-IPE023V1 isolated USB board

THÔNG SỐ KỸ THUẬT
Manufacturer STMicroelectronics
Manufacturer Part No. EVALSTPM32
For Use With Shunt Current Sensor Based on the STPM32
Kit Classification Evaluation Board
Featured Device STEVAL-IPE023V1
Kit Name Single-Phase Energy Metering Evaluation Board

Giá: Liên hệ – gửi mã và số lượng về CV@chanhvinh.com để nhận báo giá nhanh.

Compare products

Select 2 or 3 items to compare

Select first item to compare

Select second item to compare

Select third item to compare

Compare
📄 Datasheet STMicroelectronics, EVALSTPM32 (PDF)