TRACO POWERTEN 10-2411Converter: DC/DC
Traco 10W Regulated Isolated DC-DC Converter - TEN10 Series 10W single/dual output regulated isolated high performance DC-DC converters with a compact low profile package. These DC-DC converters have a high efficiency enabling an operating temperature range of -40°C to +85°C and a built-in EMI filter to EN 5022 class A without external components. Typical applications for these DC-DC converters include battery operated equipment, instrumentation, distributed power architectures in communication and industrial electronics. Products not recommended for new designs please refer to the alternative at the bottom of the page Wide 2:1 input range 1.5kVdc input/output isolation, case 1kVdc Input filter to EN55022 Class A and FCC Level A without external components Regulated outputs Continuous short circuit protection Shielded metal case with insulated base-plate SMD technology with ceramic chip capacitors Standards UL 60950-1, IEC / EN 60950-1 Approvals UL/cUL Traco Power DC-DC Converter, 22" x 1" Low-Profile Package, 1.5kV Isolation Voltage - TEN 10 Series - TEN 10-2411 On the hunt for a PSU that can withstand tough conditions? Check out this DC-DC converter from Traco Power. A 2:1 input means it accepts any voltage between 18 and 36V DC and steps it down to a regulated 5V DC that's a safe bet for powering devices running on rechargeable batteries. A broad operating temperature range of -40°C to +85°C assures you it's up to the challenges of extreme climates. Thanks to the unit's shock and vibration resistance, you can fit it near moving machinery without a problem. Features & Benefits Tight line and load regulation of 0.3% and 0.5% helps you maintain voltages closely 78% efficiency means very little energy is wasted as heat so free air convection keeps it cool Mean time between failures of over 1,000,000hrs, so you can trust it to last Continuous short-circuit protection makes current faults a thing of the past Epoxy baseplate provides electrical insulation so you can count on risk-free handling Applications Instrumentation devices Distributed power architectures Communications infrastructure Industrial electronics What's the benefit of this converter's shield? The unit's integrated shield minimises EMI to help ensure stable electrical performance.
Traco 10W Regulated Isolated DC-DC Converter - TEN10 Series
10W single/dual output regulated isolated high performance DC-DC converters with a compact low profile package. These DC-DC converters have a high efficiency enabling an operating temperature range of -40°C to +85°C and a built-in EMI filter to EN 5022 class A without external components. Typical applications for these DC-DC converters include battery operated equipment, instrumentation, distributed power architectures in communication and industrial electronics.
Products not recommended for new designs please refer to the alternative at the bottom of the page
Wide 2:1 input range
1.5kVdc input/output isolation, case 1kVdc
Input filter to EN55022 Class A and FCC Level A without external components
Regulated outputs
Continuous short circuit protection
Shielded metal case with insulated base-plate
SMD technology with ceramic chip capacitors
Standards
UL 60950-1, IEC / EN 60950-1
Approvals
UL/cUL
Traco Power DC-DC Converter, 22" x 1" Low-Profile Package, 1.5kV Isolation Voltage - TEN 10 Series - TEN 10-2411
On the hunt for a PSU that can withstand tough conditions? Check out this DC-DC converter from Traco Power. A 2:1 input means it accepts any voltage between 18 and 36V DC and steps it down to a regulated 5V DC that's a safe bet for powering devices running on rechargeable batteries. A broad operating temperature range of -40°C to +85°C assures you it's up to the challenges of extreme climates. Thanks to the unit's shock and vibration resistance, you can fit it near moving machinery without a problem.
Features & Benefits
- Tight line and load regulation of 0.3% and 0.5% helps you maintain voltages closely
- 78% efficiency means very little energy is wasted as heat so free air convection keeps it cool
- Mean time between failures of over 1,000,000hrs, so you can trust it to last
- Continuous short-circuit protection makes current faults a thing of the past
- Epoxy baseplate provides electrical insulation so you can count on risk-free handling
Applications
- Instrumentation devices
- Distributed power architectures
- Communications infrastructure
- Industrial electronics
What's the benefit of this converter's shield?
The unit's integrated shield minimises EMI to help ensure stable electrical performance.
















