🔥 Hàng sắp về · nhận đặt trước: Arduino UNO Q 4GB · VENTUNO Q Đặt trước →
Skip to content

ACIM JOUANINCeramic Heating Element, 1.15m, 630 W, 230 V ac

Heating Element Form Formable Coil HeatersCông suất 630WĐiện áp nguồn 230V ac
Mã nhà sản xuất
RCF 630
Thương hiệu
Quy cách đóng gói
1 cái
Mã kho
3743097
Liên hệ
📩 Liên hệ để có giá tốt: CV@chanhvinh.com 📄 Datasheet (PDF)

Cold-formed heating resistors

Formable heating resistors can take on any shape after forming and may therefore be used to replace faulty specific resistors, or in a normal capacity on injection nozzles, sheaths and cylindrical parts.

The internal bend radius is 8 mm for the round sleeve and 7 mm for the square section.

The resistor must be formed to be slightly smaller than the part that will be heated, to ensure good contact.

The heating length must be determined according to the part to be heated.

A formed CFR may not be reformed.

Strip Heating Elements

Note

To obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them

Warning

For reasons of safety the heater block and/or heater sheath must be bonded to earth

Approvals

UL Recognised; CSA Certified

THÔNG SỐ KỸ THUẬT
Manufacturer Acim Jouanin
Manufacturer Part No. RCF 630
Power Rating 630W
Supply Voltage 230V ac
Length 1.15m
Width 3.7mm
Heating Element Form Formable Coil Heaters

Giá: Liên hệ – gửi mã và số lượng về CV@chanhvinh.com để nhận báo giá nhanh.

Compare products

Select 2 or 3 items to compare

Select first item to compare

Select second item to compare

Select third item to compare

Compare
📄 Datasheet ACIM JOUANIN RCF 630 (PDF)