🔥 Hàng sắp về · nhận đặt trước: Arduino UNO Q 4GB · VENTUNO Q Đặt trước →
Skip to content

ONSEMINCS20081SN3T1GIC: operational amplifier

Amplifier Type Operational AmplifierInput Offset Current 1100pAInput Voltage Range 1.8 → 5.5 VMaximum Input Voltage 5.5V
Mã nhà sản xuất
NCS20081SN3T1G
Thương hiệu
Mã kho
181-1885
Liên hệ
📩 Liên hệ để có giá tốt: CV@chanhvinh.com

The NCS2008 series operational amplifiers provide rail−to−rail input and output operation, 1.2 MHz bandwidth, and are available in single, dual, and quad configurations. Rail−to−rail operation gives designers use of the entire supply voltage range while taking advantage of the 1.2 MHz bandwidth. The NCS2008 can operate on supply voltages from 1.8 to 5.5 V over a temperature range from −40 to 125°C. At a 1.8 V supply, this device has a slew rate of 0.4 V/s while consuming only 42 μA of quiescent current per channel. Since this is a CMOS device, high input impedance and low bias currents make it ideal for interfacing to a wide variety of signal sensors. The NCS2008 devices are available in a variety of compact packages. Rail−to−Rail Input and Output Wide Supply Range: 1.8 to 5.5 V Wide Bandwidth: 1.2 MHz High Slew Rate: 0.4 V/s at VS = 1.8 V Low Supply Current: 42 μA per Channel at VS = 1.8 V Low Input Bias Current: 1 pA Typical Wide Temperature Range: −40 to 125°C Available in a Variety of Packages These Devices are Pb−Free, Halogen Free/BFR Free Unity Gain Buffer Battery Powered / Low Quiescent Current Applications Low Cost Current Sensing Automotive

The NCS2008 series operational amplifiers provide rail−to−rail input and output operation, 1.2 MHz bandwidth, and are available in single, dual, and quad configurations. Rail−to−rail operation gives designers use of the entire supply voltage range while taking advantage of the 1.2 MHz bandwidth. The NCS2008 can operate on supply voltages from 1.8 to 5.5 V over a temperature range from −40 to 125°C. At a 1.8 V supply, this device has a slew rate of 0.4 V/s while consuming only 42 μA of quiescent current per channel. Since this is a CMOS device, high input impedance and low bias currents make it ideal for interfacing to a wide variety of signal sensors. The NCS2008 devices are available in a variety of compact packages.

Rail−to−Rail Input and Output

Wide Supply Range: 1.8 to 5.5 V

Wide Bandwidth: 1.2 MHz

High Slew Rate: 0.4 V/s at VS = 1.8 V

Low Supply Current: 42 μA per Channel at VS = 1.8 V

Low Input Bias Current: 1 pA Typical

Wide Temperature Range: −40 to 125°C

Available in a Variety of Packages

These Devices are Pb−Free, Halogen Free/BFR Free

Unity Gain Buffer

Battery Powered / Low Quiescent Current Applications

Low Cost Current Sensing

Automotive

THÔNG SỐ KỸ THUẬT
Manufacturer onsemi
Manufacturer Part No. NCS20081SN3T1G
Amplifier Type Operational Amplifier
Mounting Type Surface Mount
Package Type TSOP
Power Supply Type Single
Number of Channels per Chip 1
Pin Count 5
Typical Single Supply Voltage 1.8 → 5.5 V
Typical Gain Bandwidth Product 1.2MHz
Output Type Rail to Rail
Typical Slew Rate 0.4V/µs
Maximum Operating Frequency 10 kHz
Maximum Operating Temperature +125°C
Minimum Operating Temperature -40°C
Output Current ±100mA
Offset Voltage 4 mV
Typical Voltage Gain 120 dB
Rail to Rail Rail to Rail Input/Output
Automotive Standard AEC-Q100
Maximum Input Voltage 5.5V
Dimensions 3 x 1.5 x 1mm
Typical Input Voltage Noise Density 30nV/√Hz
Height 1mm
Width 1.5mm
Minimum Input Voltage 1.8V
Input Offset Current 1100pA
Input Voltage Range 1.8 → 5.5 V
Length 3mm

Giá: Liên hệ – gửi mã và số lượng về CV@chanhvinh.com để nhận báo giá nhanh.

Compare products

Select 2 or 3 items to compare

Select first item to compare

Select second item to compare

Select third item to compare

Compare